Before You Order Your New Stunning Doors, Make Sure That You Choose The Right Size!
Steps To Measure Your Door.
Step 1
Draw up all of your doors and drawer fonts in your Kitchen.
Step 2
Check for any large gaps around of the existing doors and drawer fronts. Usually the gap between adjoining doors and drawer fronts is 4mm.
Step 3
Measure the inside side of the doors, this is usually the squarest part. Always in millimetres (mm).
Note: You don't have to measure the cabinets for replacement doors. Do this procedure for each door individually.
Doors may look the same size but can be slightly different.
Step 4
List the Height & the Width of each door.
Step 5
Check your measurements and be sure you have got the correct amount of doors and drawer fronts.
Now You Are Ready to Order!
Other Useful Tips
How to measure your Drawer?
Same procedure with the doors measurement.
How to work out if my kitchen doors are left or right handed openers?
A right hand door opens to the right, and a left hand door opens towards the left. We will supply you with a ‘Hinge Hole Request Form’ if this is a service you wish to use. By standard, doors will come without hinge holes.
How to measure hinge holes?
Measure from the top of the door to the centre of the hinge hole. The Same for the bottom hinge. The position of your hinges will be standard when installing a new kitchen and therefore will not require checking.
Please note: If you are installing the doors on to existing units you will need to provide the measurements.